Barefoot Sound | Vintageking.com

Barefoot Sound

Barefoot Sound is founded on the ambition to create a new breed of audio monitor. As small and mid-sized project studios became more and more prominent in the early 2000's, Thomas Barefoot began to recognize the need for a speaker that could transcend the need for multiple types of monitors, while still delivering the highest sonic performance available, all without being cost prohibitive. The result is a monitoring solution that is turning the industry upside down. First, with the MiniMain12, again with the MicroMain27, MicroSUB and now with the MicroMain35, Barefoot Sound is at the forefront of multipurpose monitoring solutions. Vintage King believes in Barefoot Sound’s innovative designs using only the finest components and highest specifications, which is why we’re proud to offer the speakers exclusively to our customers. Whether acting as day-to-day near-fields or impressing at high volumes while serving as set of mains, Barefoot Sound's monitors are the most versatile in the world.

Following in the footsteps of the MicroMain27, the new MicroMain35 brings revolutionary Barefoot three-way technology into an even more compact enclosure. Dual force canceling 7" subwoofers, a 5" midbass driver and 1" dome tweeter are fused seamlessly into a single source. In just a few years Barefoot Sound has built a reputation for groundbreaking technological innovation executed with uncompromising quality and performance.   Barefoot monitors are known for delivering a legendary combination of deep sonic clarity and effortless translation.  The Micro Main 35 lives up to everything you would expect from a Barefoot.   Specifications <ul><li>Description 3-way active monitor with integral subs </li><li>Controls Input level attenuator, Twt/Mid/Sub amplifier mutes, crossover voicing select </li><li>Input Impedance 50k Ohm </li><li>Frequency Response 35Hz - 30kHz (+/- 3 dB), 37Hz - 20kHz (+/- 1.5 dB) </li><li>Bass Response -3dB @ 35Hz, Q = 0.707, Slope = 12 dB/octave </li><li>Cabinet 19 liters total internal volume, Sealed sub enclosure, Sealed midbass enclosure, Machined aluminum front baffle plate </li><li>Crossover Frequencies 100/2500 Hz </li><li>Tweeter 1" soft dome, Rear waveguide chamber </li><li>Power: 50 W </li><li>Midbass 5" poly cone, Sealed rear waveguide enclosure Power: 100 W </li><li>Dual Subwoofers 7" aluminum cones, 3/4" peak-to-peak linear excursion </li><li>Power: 200 W </li><li>AC Power Input Nominal 115 VAC or 230 VAC </li><li>Power Consumption Idle 20W, Maximum: 375W </li><li>Weight Speaker 42 lbs each (19 kg) </li><li>Shipping: 55 lbs each (25 kg) </li><li>Dimensions HxWxD 14.5 x 9.5 x 14.75 inches (368 x 241 x 375 mm)</li></ul>

Barefoot Sound MicroMain35 (Single) New!
3-way active monitor with integral subs
Vintage King Exclusive

...
Learn more

Following in the footsteps of the groundbreaking MicroMain27, Barefoot Sound is proud to introduce the MicroSUB extended bandwidth subwoofer. The MicroSUB uses the renowned Barefoot dual opposing driver format to achieve uncompromising, extremely linear deep bass extension. Reaching down to 22 Hz, the sealed cabinet design rolls off at 1/4 the rate of ported subs, revealing deeper bass information with far better transient response. Furthermore, while ported subs lose damping and stability at subsonic frequencies, the MicroSUB's damping actually increases. This innovative 2-way mid-bass/sub system, having precise extension up to 2 kHz, offers a great deal of flexibility. As a dedicated LFE monitor, the MicroSUB can readily reveal unwanted high frequency content in channel 6. In Satellite/Subwoofer arrangements, a pair of MicroSUBs can seamlessly transform even tiny monitors a into a powerful full-range system. Compact cabinets and near-zero vibration allow great placement flexibility as well. Place them on the floor, mount them on stands, place them on the meter bridge close to the monitors, whatever works for your application! The cabinet can be oriented either vertically or horizontally using the included pedestals (9" L x 1 3/8" W x 2 1/4" H). Topping off the uncompromising nature of the MicroSUB, a discreet 1 dB stepped attenuator level adjustment is incorporated.

Specifications
<ul>
<li>Description: 2-way active sealed-box subwoofer with extended bandwidth</li><li>
Subwoofer Input Controls: Stepped attenuator level adjust (+6 dB to -16 dB), mid/sub amplifier mutes, +10 dB gain</li><li>
Crossover Controls: 120/80/60 Hz frequency select, crossover IN/OUT</li><li>
Input Impedance: 50 kilo-ohm</li><li>
Bass Response: -3 dB @ 22 Hz, Q = 0.707, Slope = 12 dB/octave</li><li>
Pass Band Response: 26 Hz - 1.6 kHz (+/- 1.5 dB), -3 dB upper cutoff at 2 kHz</li><li>
Cabinet: 32 liters total internal volume, Sealed sub enclosure, sealed midbass enclosure, Machined aluminum front baffle plate</li><li>
Midbass Crossover Frequency: 95 Hz</li><li>
Midbass: 5" poly cone, Sealed rear waveguide enclosure</li><li>
Power (Midbass): 250 W</li><li>
Dual Subwoofers: 10" aluminum cones, 1" peak-to-peak linear excursion</li><li>
Power (Dual Subwoofers): 500 W</li><li>
AC Power Input: Nominal 115 VAC or 230 VAC selectable</li><li>
Power Consumption Idle: 30W</li>
<li>
Power Consumption Maximum: 675W</li>
<li>
Speaker Weight: 65 lbs each (30 kg)</li><li>
Shipping Weight: 73 lbs each (33 kg)</li><li>
Dimensions: (HxWxD) 20.5 x 9.5 x 15.25 inches (521 x 241 x 387 mm)
</li></ul>

Barefoot Sound MicroSUB (Single)
2-way active subwoofer
Vintage King Exclusive

...
Learn more

Find out why the MicroMain27 is the most sought after speaker in pro audio. Call Vintage King and demo today! The Barefoot Sound MicroMain27 is a groundbreaking new monitor that is in a class all its own. It is quickly becoming the premier choice for top mixing and mastering engineers. The speaker is designed to address the demands of modern recording. It breaks down the barriers between nearfield, mastering and main monitors. No need to have multiple pairs of speakers crowding your studio; no need to guess what the mastering engineer is going to hear. The MM27 is compact and powerful, truly a "nearfield on steroids." While exceptionally neutral and designed for critical listening, the MM27 is still very capable of rocking the house. It redefines the definition of a main monitor -- a "Micro Main™" monitor. The only monitor you may ever need. 
1" soft dome tweeter, dual 5" midbass drivers and dual 10" subs housed in compact sealed enclosures yield high linearity and outstanding impulse response. With 500 Watts of power in the subwoofer channel alone, the dual 10" drivers cross over seamlessly from the midbass, reaching down to 33Hz and rolling off at 1/4 the rate of ported designs to reveal much more deep bass information. Since the sub motor structures are locked together the opposing forces cancel out and the cabinet remains rock steady even at very high output levels. There is no need for bass management in 5.1 systems because the MicroMain27 is truly a full-range monitor. The speaker can be placed either vertically or horizontally using the included pedestal (9" L x 13/8" W x 21/4 H). Hand Crafted in San Francisco, California Specifications 
<ul>
<li>Description 3-way active monitor with integral subs 
</li><li>Controls Input level attenuator, Twt/Mid/Sub amplifier mutes, crossover voicing select 
</li><li>Input Impedance 50k Ohm 
</li><li>Frequency Response 38 Hz - 20 kHz (+/- 1.5 dB) 
</li><li>Bass Response -3 dB @ 33 Hz Q = 0.707 Slope: 12 dB/octave 
</li><li>Cabinet 32 liters total internal volume, Sealed sub enclosure, Individual sealed midbass enclosures, Machined aluminum front baffle plate 
</li><li>Crossover Frequencies 110/2500 Hz 
</li><li>Tweeter 1" soft dome, Rear waveguide chamber Power: 60 W 
</li><li>Dual Midbasses 5" poly cones, Sealed rear waveguide enclosures Power: 250 W 
</li><li>Dual Subwoofers 10" aluminum cones, 1" peak-to-peak linear excursion Power: 500 W 
</li><li>AC Power Input Nominal 115 VAC or 230 VAC selectable 
</li><li>Power Consumption Idle: 30W, Maximum: 675W 
</li><li>Weight Speaker: 71 lbs each (32 kg) 
</li><li>Shipping: 79 lbs each (36 kg) 
</li><li>Dimensions HxWxD 20.5 x 9.5 x 15.25 inches (521 x 241 x 387 mm) </li></ul>
<a href="http://www.farmelo.com/BarefootReview.html" target="blank">Check out this review</a>

Barefoot Sound MicroMain27 (Single)
Active 3-way nearfield, main and mastering monitor
Vintage King Exclusive

...
Learn more

The Barefoot Sound MicroMain27 is a groundbreaking new monitor that is in a class all its own. It is quickly becoming the premier choice for top mixing and mastering engineers. The speaker is designed to address the demands of modern recording. It breaks down the barriers between nearfield, mastering and main monitors. No need to have multiple pairs of speakers crowding your studio; no need to guess what the mastering engineer is going to hear. The MM27 is compact and powerful, truly a "nearfield on steroids." While exceptionally neutral and designed for critical listening, the MM27 is still very capable of rocking the house. It redefines the definition of a main monitor -- a "Micro Main™" monitor. The only monitor you may ever need. 
1" soft dome tweeter, dual 5" midbass drivers and dual 10" subs housed in compact sealed enclosures yield high linearity and outstanding impulse response. With 500 Watts of power in the subwoofer channel alone, the dual 10" drivers cross over seamlessly from the midbass, reaching down to 33Hz and rolling off at 1/4 the rate of ported designs to reveal much more deep bass information. Since the sub motor structures are locked together the opposing forces cancel out and the cabinet remains rock steady even at very high output levels. There is no need for bass management in 5.1 systems because the MicroMain27 is truly a full-range monitor. The speaker can be placed either vertically or horizontally using the included pedestal. Hand Crafted in San Francisco, California
 <a href="http://www.farmelo.com/BarefootReview.html" target="blank">Check out this review</a>

Barefoot Sound MicroMain27 5.1 System
3x front/2x rear MicroMain27. Vintage King can provide separate quote for subwoofer of your choice for Lo Frequency effect channel.
Vintage King Exclusive

...
Learn more

Built custom by Sound Anchor for Barefoot MM27

Stand Specs:<UL>
<LI>Base: 21"x17"x2" (LxWxH)
<LI>Stand Height: 56"
<LI>Tweeter Height Adjustment: 13" to 54.5"
<LI>Maximum clearance Under Speaker (vertical): 44.25"
<LI>Maximum Clearance Under Speaker (horizontal): 49"
<LI>Speaker Mount Tilt: 5 degrees up or down</UL>

Sound Anchors Stand Mounting Procedure 
 
1. Remove the mounting bracket from the stand and place it on the side of the speaker cabinet. Line up the mounting holes, insert the bolts and finger tighten. If the bolts are too long and bottom out before the bracket is snug against the speaker cabinet, STOP. You may have the wrong size bolts. Contact Vintage King. 
 
2. Secure the speaker mounting bracket to the stand at desired height. 
 
3. Attach MM27 handles the side of cabinet opposite to the side the mounting bracket will attach to. Then set the speaker horizontally on the floor. 
 
* If your cabinet doesn't have mounting bolt holes on both sides, then set the speaker horizontally between two stacks of books straddling the subwoofer to prevent it from touching the floor. 
 
4. Tilt the stand down and line up the mounting bracket holes with the cabinet bolt holes. 
5. Insert bolts and tighten until the mounting bracket is snug against the speaker cabinet. Do not over tighten! If the bolts are too long and bottom out before the bracket is snug, STOP. You may have the wrong size bolts. Contact Vintage King. 
 
* A good way to ensure you do not over tighten the bolts is to put the long end of the Allen wrench into the bolt and turn it using the short end. Tighten the bolt using no more force than you can apply to the short end of the wrench while holding it in the tips of your thumb and index finger. 
 
6. Carefully tilt the entire assembly (speaker and stand) back up so it stands vertically. 
 
<img src="/site/files/images/barefoot_stand_assembly.jpg" width="541" height="214" border="0" />

Barefoot Monitor Stand - Single
Barefoot MM27 Monitor Stand (single)
Vintage King Exclusive

...
Learn more

Barefoot Sound MicroMain27 Road Case
Holds (2x) MicroMain27s

...
Learn more

Barefoot Sound MicroMain35 (Pair) New!
3-way active monitors with integral subs
Vintage King Exclusive

...
Learn more

Barefoot Sound MicroMain27 (Pair)
Active 3-way nearfield, main and mastering monitor
Vintage King Exclusive

...
Learn more

Sort by Name

Sort by Price




Neve 1073 API Audio 527 Barefoot MicroMain 35 Radial Workhorse 5000 Telefunken AR-51 Rupert Neve Portico II Focal Monitors	What's New? Hear the Gear Recycle Your Gear Client Gallery Producers Corner Buyer's Guide	How about recycling your used gear for something different or just a change? When speaking to a sales representative, make sure to indicate that you are interested in trading your gear for a new purchase or please send an email to info@vintageking.com.	Barefoot Sound Shadow Hills Industries Neve Classic Series Evol Fucifier Slate Pro Audio	Inward Connections Tonelux ProAc Helios