Earthworks Audio | VintageKing.com

Results 1-20 of 88

1

Earthworks

Established by David Blackmer, the founder of DBX (another line of fine audio equipment carried by Vintage King), Earthworks is a New Hampshire-based company that is dedicated to quality and sonic excellence. Building upon the revolutionary advancements in VCA’s and true RMS detectors that Blackmer worked on at DBX, Earthworks continues this trend of innovation. By using patented technologies in order to manufacture the “next generation” of professional audio products, each unit is made with great care, meticulous attention to detail and a strong emphasis on quality. As a company, Earthworks prides itself in making only the very best in professional audio equipment right here in the United States.

<p>The <strong>Earthworks 1021</strong> belongs to the ZDT series.  The ZDT preamplifier series is based on all new discrete circuitry designed by David Blackmer, establishing a new standard of sonic excellence in electronics.  This exacting new standard provides frequency response from 1Hz to 200kHz +0.5dB, an incredible rise time of 0.27 microseconds and distortion of less than 1 part per million (0.0001%) - eliminating all possibility of sonic degradation.  These preamps are so fast, so clean and so transparent that you don't even know they are there.  It is like plugging your microphone into a "piece of wire with gain."  You will hear clarity and detail with the ZDT preamps that is not available in any other preamp at any price.  Check one out for your studio or other applications that demand the highest quality electronics. <br><br><strong>Features:</strong></p>
<ul>
<li>Zero distortion - less than one part per million </li>
<li>Lowest noise of any preamp on the market </li>
<li>Full differential (balanced) from XLR in to XLR out – no internal conversion to single-ended </li>
<li>All discrete components; Class A Amplification (no ICs in the signal path) </li>
<li>No electrolytic capacitors in the signal path </li>
<li>Greater transparency with minimum signal path and minimum features </li>
<li>High output level +33dBu </li>
<li>Very low output impedance will drive long lines without interference or signal loss </li>
<li>True 48 volt phantom, polarity reverse & clip indicator </li>
<li>Separate XLR & 1/4” phone (t-r-s) outputs, each with its own gain/level controls </li>
<li>1/4” phone connector output will drive balanced or unbalanced </li>
</ul>

Earthworks 1021
Single channel ultra clean preamp with zero distortion technology

Earthworks 1022
Two-channel ultra clean preamp with zero distortion technology

Earthworks 1024
Four-channel ultra clean preamp with zero distortion technology

Earthworks DK25/L
DrumKit system for live performance

Earthworks DK25/L-C Case for DK25/L
Aluminum case for DK25/L with custom insert

Earthworks DK25/R
DrumKit system for recording

Earthworks DK25/R-C Case for DK25/R
Aluminum Case for DK25/R with custom insert

<p>The <strong>Earthworks DK50/R</strong> Premium DrumKit™ System for recording provides a dramatic improvement in the sound quality of miking drums.  This recording system has <strong>two</strong> QTC50 omni mics for overheads, one SR30 cardioid mic for the kick, three LevelPads™, a KickPad™ and windscreen. <br><br><strong>QTC50 Omni Microphone</strong><br>Each QTC50 mic is ideal for digital recording with sample rates up to 192kHz, and even higher where every nuance of sound must be captured.  Each has an extended high frequency response from 3Hz to 50kHz and better impulse response. <br><br><strong>SR30 Cardioid Microphone</strong><br>Earthworks SR30 is the most accurate cardioid microphone on the market. With high frequency response of 30Hz to 30kHz it will capture incredible detail. at 6 inches away from the source it sounds as omni-like as a cardioid can.  The off-axis rejection is substantial yet uncolored. Its impulse response is very fast and smooth and the sound stays the same across the entire front hemisphere of pickup. <br><br><strong>KickPad™</strong><br>A pad/EQ processor for all cardioid mics used on kick drum.  Plug the KP1 and experience an "instant kick drum sound" that is exactly repeatable, every time. This is a real time saver that will work with any cardioid microphone that is used for kick drum.  As a passive device, the KickPad can be used with either condenser or dynamic cardioid microphones. <br><br><strong>LevelPad™</strong><br>The LevelPad is a high quality, in-line pad.  It is switchable to either -15dB or -30dB of attenuation and may be used for mic- or line-level signals.  With a frequency response from DC to over 200kHz, it will handle signal levels up to +30dBV with an E.I.N. of -137dBV at -15dB setting and -142dBV at the -30dB setting.  A stainless steel tube with gold plated XLR connectors on each end means your LevelPad is built to last.</p>

Earthworks DK50/R
Premium DrumKit system for recording

Earthworks DK50/R-C Case for DK50/R
Zero/Halliburton Case for DK50/R with custom insert

<div>
<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB</li>
<li>Polar pattern: cardioid</li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 145dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced input (pin 2+)</li>
<li>Min output load: 600 ohms between pin 2 and pin 3</li>
<li>Noise: 22dB SPL equivalent (A weighted)</li>
</ul>
</div>

Earthworks Flex Mic FM360
Cardioid directional microphone for podium and choir - 50Hz to 20kHz - 13"

<div>
<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB</li>
<li>Polar pattern: cardioid</li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 145dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced input (pin 2+)</li>
<li>Min output load: 600 ohms between pin 2 and pin 3</li>
<li>Noise: 22dB SPL equivalent (A weighted)</li>
</ul>
</div>

Earthworks Flex Mic FM360HC
Hypercardioid directional microphone for podium and choir - 50Hz to 20kHz - 13"

<div>
<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB</li>
<li>Polar pattern: cardioid</li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 145dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced input (pin 2+)</li>
<li>Min output load: 600 ohms between pin 2 and pin 3</li>
<li>Noise: 22dB SPL equivalent (A weighted)</li>
</ul>
</div>

Earthworks Flex Mic FM500
Cardioid directional microphone for podium and choir - 50Hz to 20kHz - 19"

<div>
<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB</li>
<li>Polar pattern: cardioid</li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 145dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced input (pin 2+)</li>
<li>Min output load: 600 ohms between pin 2 and pin 3</li>
<li>Noise: 22dB SPL equivalent (A weighted)</li>
</ul>
</div>

Earthworks Flex Mic FM500HC
Hypercardioid directional microphone for podium and choir - 50Hz to 20kHz - 19"

<div>
<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB</li>
<li>Polar pattern: cardioid</li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 145dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced input (pin 2+)</li>
<li>Min output load: 600 ohms between pin 2 and pin 3</li>
<li>Noise: 22dB SPL equivalent (A weighted)</li>
</ul>
</div>

Earthworks Flex Mic FM720
Hypercardioid directional microphone for podium and choir - 50Hz to 20kHz - 27"

<p><strong>Earthworks Flex Series </strong>microphones offer exceptional intelligibility and sound quality.  Their patented pick-up pattern allows an orator to move up to 90 degrees off-axis and still be heard with exceptional intelligibility and sound quality.  This is a real advantage for church, civic and corporate podium speech applications. As an added plus, the Flex Mics smooth off-axis response will provide more gain before feedback.  The flexible neck allows adjustment of microphone positioning with no handling noise. <br><br>Flex Mics are intended for podium use, however they can also be used as hanging choir or orchestra microphones.  Their sound quality is comparable to our other high quality cardioids for a variety of applications such as vocals, piano, acoustic instruments and even drums.  They are flat from 50Hz to 20kHz within + 2dB at 6 inches and will handle up to 145dB SPL.  In addition to smooth frequency response (on and off-axis), they have impressive impulse response, diaphragm settling time and pristine sound quality that is not usually available in podium microphones.  Earthworks Flex Mics provide high intelligibility for clear audible communication. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: 50Hz to 20kHz +-2dB </li>
<li>Polar pattern: cardioid </li>
<li>Sensitivity: 8mV/Pa (-42dBV/Pa) </li>
<li>Power requirements: 48V phantom, 10mA </li>
<li>Max acoustic input: 145dB SPL </li>
<li>Peak output voltage: 10V </li>
<li>Output: XLR intended to drive a balanced input (pin 2+) </li>
<li>Min output load: 600 ohms between pin 2 and pin 3 </li>
<li>Noise: 22dB SPL equivalent (A weighted) </li>
</ul>

Earthworks Flex Mic FM720HC
Hypercardioid directional microphone for podium and choir - 50Hz to 20kHz - 27"

<div>
<p>The <strong>Earthworks M30</strong> is a very cost effective reference microphone for SMAART™, MLSSA™, Spectrafoo™, TEF™ & RTA and all “audio band” measurements.  It has a flat frequency response, fast impulse response and exceptional polar characteristics. Requires 48V phantom power. <br><br>Designed to work with laptop computers, this battery operated version of the M30 has a built-in preamp with a +14dB gain switch. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: +-1dB 9Hz to 27kHz, +1/-3dB 5Hz to 30kHz</li>
<li>Polar pattern: omnidirectional</li>
<li>Sensitivity: 8mV/Pa (-42 dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 150dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced transformerless input (pin 2+)</li>
<li>Min output load: 600ohms between pin2 and 3</li>
<li>Noise: 27dB SPL equivalent (A weighted)</li>
<li>Dimensions (LxD): 229mm x 22mm (9 x .860 inches)</li>
<li>Influence of magnetic field: 80A/M induces less than 52dB SPL equivalent</li>
</ul>
</div>

Earthworks M30
Omni measurement microphone- 5Hz to 30kHz +1/-3dB

<div>
<p>The <strong>Earthworks M30</strong> is a very cost effective reference microphone for SMAART™, MLSSA™, Spectrafoo™, TEF™ & RTA and all “audio band” measurements.  It has a flat frequency response, fast impulse response and exceptional polar characteristics. Requires 48V phantom power. <br><br>Designed to work with laptop computers, this battery operated version of the M30 has a built-in preamp with a +14dB gain switch. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: +-1dB 9Hz to 27kHz, +1/-3dB 5Hz to 30kHz</li>
<li>Polar pattern: omnidirectional</li>
<li>Sensitivity: 8mV/Pa (-42 dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 150dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced transformerless input (pin 2+)</li>
<li>Min output load: 600ohms between pin2 and 3</li>
<li>Noise: 27dB SPL equivalent (A weighted)</li>
<li>Dimensions (LxD): 229mm x 22mm (9 x .860 inches)</li>
<li>Influence of magnetic field: 80A/M induces less than 52dB SPL equivalent</li>
</ul>
</div>

Earthworks M30BX
Battery operated version of M30Omni - 9Hz to 30kHz.

<div>
<p>The <strong>Earthworks M30</strong> is a very cost effective reference microphone for SMAART™, MLSSA™, Spectrafoo™, TEF™ & RTA and all “audio band” measurements.  It has a flat frequency response, fast impulse response and exceptional polar characteristics. Requires 48V phantom power. <br><br>Designed to work with laptop computers, this battery operated version of the M30 has a built-in preamp with a +14dB gain switch. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: +-1dB 9Hz to 27kHz, +1/-3dB 5Hz to 30kHz</li>
<li>Polar pattern: omnidirectional</li>
<li>Sensitivity: 8mV/Pa (-42 dBV/Pa)</li>
<li>Power requirements: 48V phantom, 10mA</li>
<li>Max acoustic input: 150dB SPL</li>
<li>Peak output voltage: 10V</li>
<li>Output: XLR intended to drive a balanced transformerless input (pin 2+)</li>
<li>Min output load: 600ohms between pin2 and 3</li>
<li>Noise: 27dB SPL equivalent (A weighted)</li>
<li>Dimensions (LxD): 229mm x 22mm (9 x .860 inches)</li>
<li>Influence of magnetic field: 80A/M induces less than 52dB SPL equivalent</li>
</ul>
</div>

Earthworks M30BXMP
Battery operated version of M30Omni - 9Hz to 30kHz - matched pair in wood box

<p>The <strong>Earthworks M30</strong> is a very cost effective reference microphone for SMAART™, MLSSA™, Spectrafoo™, TEF™ & RTA and all “audio band” measurements.  It has a flat frequency response, fast impulse response and exceptional polar characteristics. Requires 48V phantom power. <br><br> Designed to work with laptop computers, this battery operated version of the M30 has a built-in preamp with a +14dB gain switch. <br><br><strong>Specifications:</strong></p>
<ul>
<li>Frequency response: +-1dB 9Hz to 27kHz, +1/-3dB 5Hz to 30kHz </li>
<li>Polar pattern: omnidirectional </li>
<li>Sensitivity: 8mV/Pa (-42 dBV/Pa) </li>
<li>Power requirements: 48V phantom, 10mA </li>
<li>Max acoustic input: 150dB SPL </li>
<li>Peak output voltage: 10V </li>
<li>Output: XLR intended to drive a balanced transformerless input (pin 2+) </li>
<li>Min output load: 600ohms between pin2 and 3 </li>
<li>Noise: 27dB SPL equivalent (A weighted) </li>
<li>Dimensions (LxD): 229mm x 22mm (9 x .860 inches) </li>
<li>Influence of magnetic field: 80A/M induces less than 52dB SPL equivalent </li>
</ul>

Earthworks M30MP
Omni measurement microphone- 5Hz to 30kHz +1/-3dB - matched pair in cherry box

Earthworks M50
Omni measurement microphone - 3Hz to 50kHz +1/-3dB

Results 1-20 of 88

1




API Audio Neve Barefoot Sound Shadow Hills Industries Retro Instruments Waves Audio Coles Microphones Endless Analog Clasp		Read what people are saying about Vintage King Audio Sales & Service from around the world. Read them here!		How about recycling your used gear for something different or just a change? When speaking to a sales representative, make sure to indicate that you are interested in trading your gear for a new purchase or please send an email to info@vintageking.com.

SALES		CUSTOMER SERVICE
888.653.1184 ext 3 +1.248.591.9276 ext 3 Sales Hours: M-F 10 to 8 (ET) Sat 12 to 4 (ET) Sun Closed More Information		888.653.1184 ext 2 +1.248.591.9276 ext 2 Customer Service Hours M-F 10 to 6 (ET) Sat Closed Sun Closed More Information

WHY SHOP KING?

Privacy and Security

Satisfaction Guaranteed

Warranty Information

Shipping and Delivery

Lifetime Customer Support

RESOURCES

Frequently Asked Questions

Terms and Conditions

Infrasonic Sound

Article Archives

Tax Exempt Forms

NEWS ROOM

ENTER EMAIL FOR
SPECIAL OFFERS

OUR NETWORKS

CATEGORIES

QUICK LINKS

Producers Corner

Trade Your Gear

Pensado's Place

Facebook Giveaways

OUR NETWORKS