• Advanced Linear Spatial Reference design ensures flatter response at the mix position.
• Differential Drive® technology with dynamic braking for extended low frequency response and low power compression.
• Neodymium midrange with 2" voice coil and Kevlar™ cone material for extended frequency response and low distortion.
• Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
• High-Density baffle for low enclosure resonance and stable inertial ground
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Magnetically shielded for use near video monitors.
• Reinforced enclosure and convenient mounting points allow mounted installation.
• Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
• Available as mirror image left and right models.

Specifications

nput Impedance: 4 ohm (Nominal)

Anechoic Sensitivity: 93 dB/2.83 V/1 m
(90 dB/ 1 W/ 1 m)

Frequency Response: +1. -1.5 dB
(60 Hz – 22 kHz)

Low Frequency Extension: -3 dB: 54 Hz
-10 dB: 35 Hz

Enclosure Resonance Frequency: 33 Hz

Long Term Maximum Power (IEC265-5): 200 W continuous average; 800 W peak

Recommended Amplifier Power: 150 W - 1000 W (rating into 4-ohm load)

High Frequency Control: 0 dB, -1 dB (2.5 to 20 kHz)

Distortion, 96 dB SPL, 1 m: 2nd Harmonic (below 120 Hz): <1.5%
3rd Harmonic (below 120 Hz): <1%
2nd Harmonic (120 Hz to 20 kHz): <0.5%
3rd Harmonic (120 Hz to 20 kHz): <0.4%

Distortion, 102 dB SPL, 1 m: 2nd Harmonic (below 120 Hz): <1.5%
3rd Harmonic (below 120 Hz): <1%
2nd Harmonic (80 Hz to 20kHz): <1%
3rd Harmonic (80 Hz to 20kHz): <1%
(<0.4%, 250 Hz - 20 kHz)

Power Nonlinearity: 30 W (20 Hz to 20 kHz): <0.4 dB
100 W (20 Hz to 20 kHz): <1.0 dB

Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 250 Hz

Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 2.2 kHz