Nearly two decades ago, Inward Connections created the TLM-1 (Tube
Limiter Module) for their Vac Rac modular processing system. The TLM-1
was highly favored by many of the world’s top recording engineers and
when the modular Vac Rac was discontinued, the TLM-1 topology found life
as a new standalone, dual-channel unit. Thus, the TSL series was born.
The TSL-4 is the latest incarnation of this classic design. It adds new
features without altering the sonic signature engineers have come to
revere – Smooth limiting presented with the euphonic character and
warmth of tubes. If you want to control the transients of vocals,
guitars, bass or the mix bus, without tweaking a whole bunch of
controls, the TSL-4 is exactly what you’ve been looking for.
The Inward Connections TSL-4V Vac Rac
is the TSL-4 equipped with hand-selected and factory-installed NOS
tubes in the audio path. GE JAN 6072A’s and GE 12BH7A’s give the TSL-4V
its rich, soulful yet articulate voice. It's tone that many feel can
only come from tubes of the past. The TSL-4V is a special order item
and subject to the availability of tubes required.
Features per channel:
40-Detent Gain Makeup Control – variable control of 14dB of output gain 40-Detent Gain Reduction Control – variable control of up to 40dB of gain reduction Bypass Switch – engages or disengages the gain reduction element Output Switch – Assigns meters to Gain Reduction or Output Hi-Pass Filter Switch – engages 100Hz high pass filter within the gain reduction circuit Link Switch – Links opto cells of both channels for stereo operation Large 3"x3" Illuminated VU meter Zero trim to calibrate the meter in Limit mode Tubes used in both input channels: Input stage - 6072A, Output stage - 12BH7A Power Supply: Pure Class A high voltage tube design with AC Voltage selector Unit dimensions: 3 rack space. 5.25" Height, 19" Width, 11.5" Depth Rugged, well-ventilated, 3U steel chassis design Classic vintage look Transformer Balanced, Line Level, XLR inputs and outputs
Specifications:
Gain Reduction: up to 40db Input Impedance: >100k ohms Frequency Response: +/- 0.5 dB @ 20Hz to 20KHz Output Signal to Noise Ratio: -85dB THD + Noise: .015% @ 20Hz (0dB ref.) .085% @ 20KHz (0dB ref.) .15% @ 20Hz to 20KHz (+30dB ref.) Maximum Input Level: +20dB Maximum Output Level: +20dBm @ 600 ohms +34dBv @ 10K ohms Output Impedance: 600 ohms transformer balanced output
With a warm and upfront low-end, punchy mid-range and open top end, the Inward Connections Magnum VU
will bring new life to your recording rig. Classic sounding warmth, but
with airiness and headroom for days. Magnum offers something different
than the old standbys. Extra large tone for your lunchbox!
Features
Circuitry features two VF600 all discrete amp blocks LED VU meter that monitors the output level
+48VDC phantom power switch Phase reverse switch -20dB pad switch Hi-Z low level line input 1/4" phone jack for guitars, keyboards and low level instruments 12-position rotary trim (5dB per step), 25dB to 80dB selectable range 70hz hi-pass filter Output level rotary control Balanced input and output transformers Fits standard 500 series slot configuration, mechanically and electrically Powder coating in Gunmetal color
The Inward Connections Vogad is
an extremely versatile and punchy compressor/limiter using the new
VF-600 amp block for increased warmth and vibe. Give in your face punch
to those drum tracks! Excellent channel dynamic or can be linked for use
on the drum buss or across an entire mix. Features VF600 discrete amp blocks Differential balance input transformerless Balance output transformer Fits standard 500 series slot configuration mechanically and electrically Gain Makeup Control +/- 16dB attenuation Threshold Control -40dB to +22dB. This allows for low level compression to high level limiting Ratio Control ranges from 2:1 to 30:1 to infinity Attack Control ranges from .2 milliseconds to 20 milliseconds Release Control ranges from .1 seconds to 3 seconds Gain Reduction Meter: 10-segment LED meter bar that ranges from -2dB to -20dB Hi-Pass Filter: 250Hz for detector circuit only Stereo
Link Switch allows module detector circuit to be tied to adjacent
compressor module. Both link switches have to be in the “UP” position Bypass Switch controls a bypass relay Powder coating in gunmetal gray
Specifications Input Impedance: 20K ohms balance Output Impedance: 600 ohms balance Frequency Response: +/- 0.2dB@10Hz to 100KHz Output Signal to Noise: -95dB or greater THD + Noise: .01%@1KHz/+4dBu Distortion: .01% THD, +4dBu@1KHz
Get the classic warmth and sweetness of vintage passive EQ designs for your 500 series lunchbox with the Inward Connections Impulse .
Great on vocal, bass, or in stereo pairs for the mix buss. The VF-600
discrete amp block used in the Impulse will give that extra size and
smooth openness that you crave in your mix!
Features
Hi Mid Band Controls Frequency switch selects 4K, 8K, 12K, 16K, 20KCS -16dB cut level Mid Band Peak Controls Frequency switch selects 1K, 2K, 3K, 4K, 5K, 8K, 10K, 12K, 16KCS Bandwidth control +14dB boost level Lo Band Shelf Controls Frequency switch selects 20Hz, 30Hz, 60Hz, 90Hz, 120Hz -16dB cut level +14dB boost level Bypass switch VF600 discrete amp blocks Differential
balance input transformer Balance output transformer Double-wide
module fits in standard 500 series rack slots configuration
mechanically and electrically Powder coating in gunmetal gray
Specifications
Input
Impedance: 600 ohms balance Output Impedance: 600 ohms balance Frequency
Response: +/- 0.5dB to 50KHz Output Signal to Noise: -95dB or
greater THD + Noise: .01% @ 1KHz/+4dBu
Inward Connections The Brute is
one of the most well suited compressor/limiters within the 500 series
format to obtain a "high-end" vocal sound. It will add warmth and
presence to your vocal, bringing out a breathy and airy quality while
also smoothing out peaks and bringing the vocal up front in your mix.
The Brute is also excellent for guitars, bass, and anywhere else a
smooth and warm optical limiter can be of use.
Features
Gain reduction control Zero adjust trim Output level control Hi-Pass filter: 250Hz for detector circuit Bypass switch LED lighted VU meter VU meter output/reduction switch Link switch VF600 all discrete legendary amp blocks Optocell reduction circuitry identical to TSL-3 Tube Limiter Balance input and output transformers Fits standard 500 series slot configuration mechanically and electrically Powder coating in gunmetal gray
Specifications
Gain Reduction: up to 40dB Input Impedance: >100K ohms balance Output Impedance: 600 ohms balance Frequency Response: +/- 0.5dB@20Hz to 50KHz Output Signal to Noise: -95dB or greater THD + Noise: .01%@1KHz/+4dBu Reserve Makeup Gain: +15dB
The Inward Connections Nitro is a
fully parametric 500 series 2-band EQ using the new VF-600 amp blocks
for adding warmth and power to your mix. Use for individual tracks where
you want to open the top end up, or to pull out problem frequencies.
Very simple and versatile design. Charge up your tracks with the Nitro!
Features
Low band frequency range 35Hz to 1KHz High band frequency range 560Hz to 16KHz Maximum boost/cut +/- 20dB Range of bandwidth adjustment 0.16 to 2.0 octave Bypass switch VF600 discrete amp blocks Differential balance input transformer less Balance output transformer Fits standard 500 series slot configuration mechanically and electrically Powder coating in gunmetal gray
Specifications
Input Impedance: >20K ohms balance Output Impedance: 600 ohms balance Frequency Response: +/- 0.5dB@20Hz to 50KHz Output Signal to Noise: -95dB or greater THD + Noise: .01%@1KHz/+4dBu
With a warm and upfront low-end, punchy mid-range and open top end, the Inward Connections Magnum
will bring new life to your recording rig. Classic sounding warmth, but
with airiness and headroom for days. Magnum offers something different
than the old standbys. Extra large tone for your lunchbox!
Features
Circuitry features two VF600 all discrete amp blocks +48VDC phantom power switch Phase reverse switch -20dB pad switch Hi-Z low level line input 1/4" phone jack for guitars, keyboards and low level instruments 12-position rotary trim (5dB per step), 25dB to 80dB selectable range Three hi-pass filter selectable switches: 70Hz, 100Hz and 200Hz Output level rotary control Balanced input and output transformers Fits standard 500 series slot configuration, mechanically and electrically Powder coating in Gunmetal color
Built using the same proprietary op-amps as the DEQ-1, this unit sounds very large and fat while still retaining clarity and detail in the high end. The mid range comes across as punchy and perceptually loud, which adds excitement to any mix. The perfect way to relieve your overworked digital mix buss and restore resolution and depth to your mixes.
Features:
16 line inputs with pan on each channel
Insert with bypass on the stereo buss.
Stereo master level pot
Stereo meters
Fully discrete
20 of the infamous Inward 690 Op-Amp designed by John Hall
Can be linked with other mixers without sacrificing channels
Add warmth and euphonic tube character to your tracks with the venerable Inward Connections Vac Rac TSL-3. Famous amongst professionals for making a vocal sit in a mix without the need for vocal rides, it imparts a wonderful character without sounding "tubby." The elegant way in which it controls transients makes it a must have in the studio for vocals, bass, and buss duties.Features per channel:
Gain make-up level
Gain reduction control
Bypass switch
Output/Gain reduction switch mode
Zero adjust trim Master Link Switch Large 3"x3" VU meter
Illuminated VU meters
Tubes used in both input channels: Input stage - 6072A, Output stage - 12BH7A
Power Supply: Pure Class A high voltage tube design using 6BM8
Unit dimensions: 3 rack space. 5.25" Height, 19" Width, 11.5" Depth
Rugged steel chassis design
Classic vintage look
Specifications:
Gain Reduction: up to 40db
Input Impedance: >100k ohms
Frequency Response: +/- 0.5 dB @ 20Hz to 20KHz
Output Signal to Noise Ratio: -85dB
THD + Noise:
.015% @ 20Hz (0dB ref.)
.085% @ 20KHz (0dB ref.)
.15% @ 20Hz to 20KHz (+30dB ref.)
Maximum Input Level: +20dB
Maximum Output Level:
+20dBm @ 600 ohms
+34dBv @ 10K
Output Impedance: 600 ohms transformerless unbalanced output
With a warm and upfront low-end, punchy mid-range and open top end, the Inward Connections Magnum
will bring new life to your recording rig. Classic sounding warmth, but
with airiness and headroom for days. Magnum offers something different
than the old standbys. Extra large tone for your lunchbox!
Features
Circuitry features two VF600 all discrete amp blocks +48VDC phantom power switch Phase reverse switch -20dB pad switch Hi-Z low level line input 1/4" phone jack for guitars, keyboards and low level instruments 12-position rotary trim (5dB per step), 25dB to 80dB selectable range Three hi-pass filter selectable switches: 70Hz, 100Hz and 200Hz Output level rotary control Balanced input and output transformers Fits standard 500 series slot configuration, mechanically and electrically Powder coating in Gunmetal color
The Inward Connections Nitro is a
fully parametric 500 series 2-band EQ using the new VF-600 amp blocks
for adding warmth and power to your mix. Use for individual tracks where
you want to open the top end up, or to pull out problem frequencies.
Very simple and versatile design. Charge up your tracks with the Nitro!
Features
Low band frequency range 35Hz to 1KHz High band frequency range 560Hz to 16KHz Maximum boost/cut +/- 20dB Range of bandwidth adjustment 0.16 to 2.0 octave Bypass switch VF600 discrete amp blocks Differential balance input transformer less Balance output transformer Fits standard 500 series slot configuration mechanically and electrically Powder coating in gunmetal gray
Specifications
Input Impedance: >20K ohms balance Output Impedance: 600 ohms balance Frequency Response: +/- 0.5dB@20Hz to 50KHz Output Signal to Noise: -95dB or greater THD + Noise: .01%@1KHz/+4dBu
With a warm and upfront low-end, punchy mid-range and open top end, the Inward Connections Magnum VU will bring new life to your recording rig. Classic sounding warmth, but with airiness and headroom for days. Magnum offers something different than the old standbys. Extra large tone for your lunchbox! Features Circuitry features two VF600 all discrete amp blocks LED VU meter that monitors the output level +48VDC phantom power switch Phase reverse switch -20dB pad switch Hi-Z low level line input 1/4" phone jack for guitars, keyboards and low level instruments 12-position rotary trim (5dB per step), 25dB to 80dB selectable range 70hz hi-pass filter Output level rotary control Balanced input and output transformers Fits standard 500 series slot configuration, mechanically and electrically Powder coating in Gunmetal color