TC Electronic | VintageKing.com

Results 1-20 of 88

1

TC Electronic

The 8 inputs and output channels of audio in AES digital format are made accessible by connecting the AES cable to the 25 pin D-type connector. The AES cable is coded XLR type connector’s in numerical order; each carries a pair of digital audio channels.
<p>
Take full advantage of EQ Station's tremendous processing resolution with the new optional Digital AES/EBU I/O card. No other equalizer or dynamics processor for live applications come close to this much internal headroom. For a user transitioning to digital mixing, one of the appealing solutions is to start using the EQ Station via the digital domain. Thereby a synchronous, high resolution digital signal path with mastering grade DA converters is provided, and with a lower noise and distortion than what can be found on other converters on digital consoles today.
</p><p>
EQ Station doesn't only feature the ultimate precision resolution; its timing is also magnitudes better than other live processing devices. Predictability counts in professional audio, and EQ Station is the perfect anchor to remove jitter from any interfacing, and provide clean feeds from its analog and digital outputs. DA, sample rate conversion and even interfacing reliability is readily compromised when jitter from long cable runs, or less than perfect digital transmitters, is present in the signal path. Therefore, jitter rejection is a major quality guarantying factor. Jitter rejection and timing circuitry of EQ Station is built on the experience from the acclaimed TC System 6000.
</p><p>
On the user side, TC's long time experience with digital interfacing helps diagnose if synchronicity on any of EQ Station's digital inputs fails, while clock back-up options ensures uninterrupted operation, even under severe operating conditions.</p>

TC Electronic 8 Channel Digital AES 8 Card
Digital AES I/O card for EQ Station

TC Electronic ADA 24/96
High Resolution Converter Card

TC Electronic Assimilator
EQ Fingerprint EQ PowerCore Plug-In

TC Electronic Backdrop
Noise Reduction Software for System 6000

<BR>With the introduction of the D-TwoTC Electronic have once again succeeded in developing cutting edge technology, expanding the way you work with your effects processor! Your creativity will be the only limit when it comes to exploring the endless number of delay possibilities within the D-Two. <BR><BR><B>True 24 Bit</B><BR>State-of-the-art hardware provides you with true 24 bit resolution A/D and D/A converters and true 24 bit RAM memory. The unique hardware design ensures that the delay effects you get from the D-Two only come in one variety: <B>Delay Re-Invented</B><BR>When TC Electronic introduced the TC 2290, the Professional Audio Industry was given an exceptional tool for creating stunning delay effects. Since the introduction of the TC 2290, digital delay processors have been built on the same basic principle. <BR><BR><B>Standard Delay Line</B> <BR>The standard delay line of the D-Two is based around a delay line with a feedback loop. The audio is fed back via the loop, which results in repeats. <BR><BR><B>The D?Two Delay Line</B><BR>The D-Two delay/feedback strategy is different from ordinary delay products. In the D-Two the repeats are caused by a number of taps that are not fed back into the delay line. That enables the D-Two to output a specific number of repeats, providing you with ultimate control.<BR><BR><B>Rythm Delay</B><BR>It is also possible to feed the last tap back into the delay line, generating a complete rhythm sequence, which is repeated when you have the Feedback active. This unique feature allows you to exactly match your effects to your music. <BR><BR><B>Rhythm Tap</B> <BR>TC introduces the truly musical Rhythm Tap feature: Not only tempo, but actual rhythm patterns can be tapped directly - or quantized according to a specific tempo and subdivision. The delays and rhythm patterns can be up to 10 seconds each. Control the exact number of repeats with Absolute Repeat Control. <BR><BR><B>Setting Up</B> <BR>Setting up your D-Two is extremely easy. Either choose Regular mode for standard delay applications or choose the Unique D-Two Rhythm mode. Simply tap in a specific rhythm and match this to your source material. You automatically enter the Rhythm mode when you tap the FEEDBACK/RHYTHM key. <BR><BR><B>Complete Overview</B><BR><B>Add-On-Effects</B> <BR>The D-Two Delay processor comes with six unique add-on effects. You can access all parameters of the six effects directly from the front panel. <BR><BR><B>Chorus</B><BR>A great sounding pitch-modulated delay in the shape of TC?s world-acclaimed Chorus is included in the D-Two as well. Double clicking on the CHORUS key provides you with instant access to all chorus parameters. <BR><BR><B>Filter</B> <BR>Add Filter to your delay to get a softer, warmer and more natural sounding delay. Reduce the high frequencies of your delay with the D-Two filter effect. This gives you a delay which in most cases will seem less disturbing on the overall sound. <BR><BR><B>Spatial</B><BR>Use the Spatial Delay effect if you want to add more width to the sound of your material. Extra width is generated either by offsetting left channel up to +/-200ms or by reversing the phase on any channel or both. <BR><BR><B>Reverse Delay</B><BR>The Reverse Delay effect processes the signal, and adds a backward delay. <BR><BR><B>Dynamic Delay</B> <BR>Get one of the most useful delay functions with the D-Two:The Dynamic Delay effect. Reduce the delay level as much as you like while the signal is fed to the Input, or enhance the delay level when the signal is at a lower level. When using this function you get a delay effect which seems to be present only where and when it does not disturb or interfere with the source material e.g. in the pauses between phases from a vocalist, a guitar player or similar. <BR><BR><B>Ping-Pong</B> <BR>Let your material jump from left to right, left-center-right or let the D-Two dynamically fit the panning to your chosen number of taps. I

TC Electronic D-Two
Studio/PA Multitap Rhythm Delay Processor

The <b>TC Electronic Studio Konnekt 48</b> is the member of the FireWire powered Konnekt audio interface family offering the most comprehensive feature set that the world has ever seen in an audio interface.
It is the most complete product TC Electronic has ever made, and it represents a milestone to the computer recording world.
<br><br>
Studio Konnekt 48 offers a comprehensive array of professional features that make recording, mixing and monitoring a breeze. All essential recording tools are in one box including world-class DSP effects, a wealth of I/O options, speaker management and many other powerful tools to take your recordings to the next level.
<br><br>
The extensive I/O section features 4 IMPACT II™ preamps. With 8 line ins on the rear panel, the total amount of simultaneously streamable analog inputs is 12 as well as 12 analog outputs. Two outputs feature digitally controlled analog XLR connections for optimal connection with your main monitor speakers while the analog output section has 2 independent phones out.
<br><br>
The comprehensive digital I/O section features double ADAT 96 kHz SMUX, TOS, S/PDIF and Word Clock I/O and the digital part is powered by the second-to-none DICE Jet jitter elimination engine.
<br><br>
Studio Konnekt 48 comes with nothing short of world-class DSP effects, including the Fabrik C Studio, an easy-to-use channel strip and mastering tool that offers 4-band EQ, multiband compression and limiting based on algorithms from TC’s high-end System 6000. Also running on DSPs you'll find the Fabrik R Studio no compromise reverb based on TC Electronic Reverb 4000 technology.
It has a DSP powered 24/8 digital mixer with 48-bit double precision summing on all mix points. There is no compromise routing for all outputs and a wealth of insert points offering top-notch flexibility.
<br><br>
Not only does Studio Konnekt 48 offer support for surround speaker systems, it does way more than that. The speaker management section is based on technology from the famous AIR™ speaker series, featuring individual speaker level and delay settings. The Bass Management feature gives you total control of your sub speaker and the speaker management offers instant control of up to 3 speaker sets.

TC Electronic Studio Konnekt 48 (No Remote)
24bit/192kHz Firewire I/O with speaker mgmt, 24in/24out, MIDI, adat, s/pdif coaxial, TC DSP

The System 6000 has acquired a phenomenal reputation for the quality of its reverberation algorithms. However, it's an expensive processor by anyone's standards, and TC Electronic has graciously brought their DVR2 algorithm to Pro Tools TDM. <BR><BR>TC Electronic has put much effort into preserving the qualities of the original processor, including sweet modulation, spectral balance, spaciousness and saturation. But not only is DVR2 for TDM the most precise EMT250 emulation up to now, it also emulates its predecessor in the way parameters interact for different settings. DVR2 comes with a comprehensive set of customizable presets, focus fields for tweaking and navigation, and a built-in preset converter allowing seamless import of DVR2 presets from System 6000. <BR><BR>The vintage reset function produces a sound very close to a well preserved EMT250, which is still a favorite on lead vocal in studios fortunate enough to own one. The high resolution parameters allow for lower noise, extension of bandwidth, and control of the amount of chorusing.

TC Electronic DVR2 for TDM
DVR2 Vintage Plate Reverb Emulation Plug-in from System 6000 for Pro Tools TDM

The <B>DVR2 Digital Vintage Reverb</B> is another great professional reverb ported from the revered System 6000. It is available as a plug-in for ProTools and PowerCore. <BR><BR>TC Electronic has put much effort into preserving the qualities of the original processor, including sweet modulation, spectral balance, spaciousness and saturation. But not only is DVR2 the most precise EMT250 emulation up to now, it also emulates its predecessor in the way parameters interact for different settings. DVR2 comes with a comprehensive set of customizable presets, focus fields for tweaking and navigation, and a built-in preset converter allowing seamless import of DVR2 presets from System 6000. <BR>With the DVR2 for ProoTools and PowerCore, it is now possible to save processing power on the System 6000 for other tasks – the choice is yours. <BR><BR>The vintage reset function produces a sound very close to a well preserved EMT250, which is still a favorite on lead vocal in studios fortunate enough to own one. The high resolution parameters allow for lower noise, extension of bandwidth, and control of the amount of chorusing. <BR><BR>The PowerCore version of the plug-in can be used with any <A href="http://www.tcelectronic.com/Default.asp?Id=5953"><B>VST, AU or RTAS*</B></A> compatible audio system.

TC Electronic DVR2 PowerCore
Vintage Plate Reverb Emulation Plug-in from System 6000 PowerCore Plug-in

Dynamic EQ is a new tool for any mixing or mastering situation. This virtual processor eliminates the shortcomings of static EQ by providing a dynamically applied equalization.<BR><BR>The Dynamic EQ plug-in offers up to four definable bands working either in static or dynamic mode, or in a mixture of both. Each of the bands can be configured as a parametric EQ or as a high or low shelving filter. The sidechain bands can be unlinked from the processing bands, so the high frequency content of a mix can control the low-end and vice versa. The pristine processing of this plug-in is all in 48-bit double precision, and may even be used in a phase linear mode, that is generous with transparent results. <BR><BR>Dynamic EQ represents a new generation of mastering tools for the PowerCore platform and this virtual processor eliminates the shortcomings of static EQ by providing a marriage between dynamics processing and EQ.<BR><BR><BR><B>TC Electronic Dynamic EQ Features:</B><BR>
<UL>
<LI>Phase linear<BR></LI>
<LI>48-Bit double precision processing<BR></LI>
<LI>Up to 4 bands<BR></LI>
<LI>Independent sidechain and processing frequencies<BR></LI>
<LI>Inverse mode (processing underneath threshold)<BR></LI>
<LI>Processing can be static or dynamic</LI></UL>

TC Electronic Dynamic EQ
4-band Mixing and Mastering EQ PowerCore Plug-in

<B>The New Benchmark In Live EQ!</B><BR>The EQ Station is a dedicated Live-EQ. Combined with the Motofader-64 flying fader remote and the TCP/IP based PC/Mac editor software you have the most versatile and sophisticated, yet easy to use, EQ System for any live- and Public Address-application found on the market today. <BR><BR><B>Front Panel</B><BR>The most impressing part of the front-panel is the brightest full color display you have ever seen on a 2U 19" box for live-applications. 240x320 pixels resolution (QVGA), and a backlight that is as bright as the best laptop-PC's on the market today, makes overview of settings and adjustments extremely easy. <BR><BR>The display is accompanied with lots of large direct access buttons for accessing features and menus. Several dedicated encoder wheels for adjusting processing is also present. In total this creates an incredibly intuitive user interface that will make even the most analogue thinking sound engineer feel comfortable - within a few minutes he will be able to solve even the most critical situations in a hectic live-event. <BR><BR><B>The Ins & Outs</B><BR>The EQ Station includes high-quality analog I/O, MIDI I/O and optional digital I/O available separately. A 9-pin D-SUB connector located next to the MIDI I/O's, is primarily used for connecting the Motofader-64 flying-fader remote. A built in Link-connector works as a passive HUB and makes it very easy to daisy chain multiple EQ Station's to quickly establish a network. This way you do not need an external HUB or network-switch to connect multiple EQ Stations. <BR><BR><B>Graphic EQ</B><BR>Everybody knows that there is a big difference in the behavior and response between various industry standard analog graphic EQ's. With the EQ Station you now have a unique option to select the response type you prefer. Using the Type selector gives access to exact DSP-emulations of the main high-end analog graphic EQ's on the live-market today. <BR><BR><B>You Can Choose From:</B><BR><BR>
<LI>TC1128 
<LI>Classic960 Narrow-Q 
<LI>Classic960 Broad-Q 
<LI>Classic27 <BR><BR><B>Parametric EQ<BR></B>Six band high-quality parametric/shelving EQ is available in the EQ Station. Lo and Hi bands are selectable between fully parametric or shelving filters, band 1-4 are selectable between fully parametric and notch filters Impressive +/-24dB gain per band enables any adjustment needed to reach the desired response. A unique way of selecting and displaying the EQ filters with six small boxes makes it very easy to keep an overview of settings and fast switching between filters. <BR><BR><B>Dynamic EQ</B><BR>Dynamic EQ enables you to shape your sound depending on the energy of the signal, or to notch out specific level dependent problems. Dynamic EQ processing is not yet wide-spread in live-applications, but it can be a really powerful tool when set up according to the source material. Two different types of Dynamic EQ can be selected: Three band full-range or two band individual. <BR><BR><B>Delay & Limiter</B><BR>600 ms of Delay per channel, and a high-quality Brickwall output peak limiter is also present in EQ Station. The Brickwall limiter can be used as safety limiter, e.g. for In Ear Monitor protection. <BR><BR><B>PC/Mac Editor</B><BR>A full editing software package running on any standard PC or Mac operating system is available to remote-control an EQ Station or a network of multiple EQ Stations (virtually unlimited number of channels). <BR><BR>The PC/Mac editor software is based on the established TC Icon user interface originally made to control System 6000. The editor enables control of ALL features in the EQ Station, and because it is running on TCP/IP network protocol, standard LAN-components can be fully utilized when creating a network. <BR><BR>Wireless LAN can easily be set up, using your laptop or Tablet PC</LI>

TC Electronic EQ Station-8
8-ch. AD/DA incl. Parametric, Graphic & Dynamic EQ + Delay and Limiter. 2 Rack Units and bright color display.

<B>The New Benchmark In Live EQ!</B><BR>The EQ Station is a dedicated Live-EQ. Combined with the Motofader-64 flying fader remote and the TCP/IP based PC/Mac editor software you have the most versatile and sophisticated, yet easy to use, EQ System for any live- and Public Address-application found on the market today. <BR><BR><B>Front Panel</B><BR>The most impressing part of the front-panel is the brightest full color display you have ever seen on a 2U 19" box for live-applications. 240x320 pixels resolution (QVGA), and a backlight that is as bright as the best laptop-PC's on the market today, makes overview of settings and adjustments extremely easy. <BR><BR>The display is accompanied with lots of large direct access buttons for accessing features and menus. Several dedicated encoder wheels for adjusting processing is also present. In total this creates an incredibly intuitive user interface that will make even the most analogue thinking sound engineer feel comfortable - within a few minutes he will be able to solve even the most critical situations in a hectic live-event. <BR><BR><B>The Ins & Outs</B><BR>The EQ Station includes high-quality analog I/O, MIDI I/O and optional digital I/O available separately. A 9-pin D-SUB connector located next to the MIDI I/O's, is primarily used for connecting the Motofader-64 flying-fader remote. A built in Link-connector works as a passive HUB and makes it very easy to daisy chain multiple EQ Station's to quickly establish a network. This way you do not need an external HUB or network-switch to connect multiple EQ Stations. <BR><BR><B>Graphic EQ</B><BR>Everybody knows that there is a big difference in the behavior and response between various industry standard analog graphic EQ's. With the EQ Station you now have a unique option to select the response type you prefer. Using the Type selector gives access to exact DSP-emulations of the main high-end analog graphic EQ's on the live-market today. <BR><BR><B>You Can Choose From:</B><BR><BR>
<LI>TC1128 
<LI>Classic960 Narrow-Q 
<LI>Classic960 Broad-Q 
<LI>Classic27 <BR><BR><B>Parametric EQ<BR></B>Six band high-quality parametric/shelving EQ is available in the EQ Station. Lo and Hi bands are selectable between fully parametric or shelving filters, band 1-4 are selectable between fully parametric and notch filters Impressive +/-24dB gain per band enables any adjustment needed to reach the desired response. A unique way of selecting and displaying the EQ filters with six small boxes makes it very easy to keep an overview of settings and fast switching between filters. <BR><BR><B>Dynamic EQ</B><BR>Dynamic EQ enables you to shape your sound depending on the energy of the signal, or to notch out specific level dependent problems. Dynamic EQ processing is not yet wide-spread in live-applications, but it can be a really powerful tool when set up according to the source material. Two different types of Dynamic EQ can be selected: Three band full-range or two band individual. <BR><BR><B>Delay & Limiter</B><BR>600 ms of Delay per channel, and a high-quality Brickwall output peak limiter is also present in EQ Station. The Brickwall limiter can be used as safety limiter, e.g. for In Ear Monitor protection. <BR><BR><B>PC/Mac Editor</B><BR>A full editing software package running on any standard PC or Mac operating system is available to remote-control an EQ Station or a network of multiple EQ Stations (virtually unlimited number of channels). <BR><BR>The PC/Mac editor software is based on the established TC Icon user interface originally made to control System 6000. The editor enables control of ALL features in the EQ Station, and because it is running on TCP/IP network protocol, standard LAN-components can be fully utilized when creating a network. <BR><BR>Wireless LAN can easily be set up, using your laptop or Tablet PC</LI>

TC Electronic EQ Station-8-Digital Only
8-Channel Graphic & Dynamic EQ + Delay and Limiter w/ Digital I/O only

<B>The New Benchmark In Live EQ!<BR></B>The EQ Station is a dedicated Live-EQ. Combined with the Motofader-64 flying fader remote and the TCP/IP based PC/Mac editor software you have the most versatile and sophisticated, yet easy to use, EQ System for any live- and Public Address-application found on the market today.<BR><BR><B>Front Panel</B><BR>The most impressing part of the front-panel is the brightest full color display you have ever seen on a 2U 19" box for live-applications. 240x320 pixels resolution (QVGA), and a backlight that is as bright as the best laptop-PC's on the market today, makes overview of settings and adjustments extremely easy.<BR><BR>The display is accompanied with lots of large direct access buttons for accessing features and menus. Several dedicated encoder wheels for adjusting processing is also present. In total this creates an incredibly intuitive user interface that will make even the most analogue thinking sound engineer feel comfortable - within a few minutes he will be able to solve even the most critical situations in a hectic live-event.<BR><BR><B>The Ins & Outs</B><BR>The EQ Station includes high-quality analog I/O, MIDI I/O and optional digital I/O available separately. A 9-pin D-SUB connector located next to the MIDI I/O's, is primarily used for connecting the Motofader-64 flying-fader remote. A built in Link-connector works as a passive HUB and makes it very easy to daisy chain multiple EQ Station's to quickly establish a network. This way you do not need an external HUB or network-switch to connect multiple EQ Stations.<BR><BR><B>Graphic EQ</B><BR>Everybody knows that there is a big difference in the behavior and response between various industry standard analog graphic EQ's. With the EQ Station you now have a unique option to select the response type you prefer. Using the Type selector gives access to exact DSP-emulations of the main high-end analog graphic EQ's on the live-market today.<BR><BR><B>You Can Choose From:</B><BR>
<UL>
<LI>TC1128 <BR>
<LI>Classic960 Narrow-Q<BR>
<LI>Classic960 Broad-Q<BR>
<LI>Classic27</LI></UL><BR><B>Parametric EQ</B><BR>Six band high-quality parametric/shelving EQ is available in the EQ Station. Lo and Hi bands are selectable between fully parametric or shelving filters, band 1-4 are selectable between fully parametric and notch filters Impressive +/-24dB gain per band enables any adjustment needed to reach the desired response. A unique way of selecting and displaying the EQ filters with six small boxes makes it very easy to keep an overview of settings and fast switching between filters.<BR><BR><B>Dynamic EQ</B><BR>Dynamic EQ enables you to shape your sound depending on the energy of the signal, or to notch out specific level dependent problems. Dynamic EQ processing is not yet wide-spread in live-applications, but it can be a really powerful tool when set up according to the source material. Two different types of Dynamic EQ can be selected: Three band full-range or two band individual.<BR><BR><B>Delay & Limiter</B><BR>600 ms of Delay per channel, and a high-quality Brickwall output peak limiter is also present in EQ Station. The Brickwall limiter can be used as safety limiter, e.g. for In Ear Monitor protection.<BR><BR><B>PC/Mac Editor</B><BR>A full editing software package running on any standard PC or Mac operating system is available to remote-control an EQ Station or a network of multiple EQ Stations (virtually unlimited number of channels).<BR><BR>The PC/Mac editor software is based on the established TC Icon user interface originally made to control System 6000. <BR>The editor enables control of ALL features in the EQ Station, and because it is running on TCP/IP network protocol, standard LAN-components can be fully utilized when creating a network. <BR><BR>Wireless LAN can easily be set up, using your laptop or Tablet PC

TC Electronic EQ Station-8/8
8-ch. AD/DA & 8-ch AES/EBU incl. Parametric, Graphic & Dynamic EQ + Delay and Limiter. 2 Rack Units and bright color display.

TC's Fabrik C Plug-in for PowerCore gives you all the processing power of a channel strip in a single plug-in. With intuitive and easy control over dedicated parameters you get instant gratification while tweaking your tracks. <BR><BR><B>Fabrik C Plug-in for PowerCore at a Glance:</B><BR>
<UL>
<LI>EQ, de-esser, and multiband compressor in one plug-in<BR></LI>
<LI>3-band compressor can switch to full-band mode</LI></UL><BR><B>EQ, de-esser, and multiband compressor in one plug-in</B><BR>The Fabrik C is a full-blown EQ, de-esser and 3-band/full band compressor in one single plug-in - in short, the Fabrik C has all the qualities of a channel strip. With the Meta Intuitive Navigation Technology (MINT) you have total control of all the parameters, using only a few dedicated knobs. The EQ is a 4-band parametric EQ with high/low-pass filters - choose between 4 different filter types. Based on no-nonsense design, the de-esser is based on one fader that gives you total control. <BR><BR><B>3-band compressor can switch to full-band mode</B><BR>Unlike other compressors, the Fabrik C comes with an inbuilt 3-band intelligent compressor. But of course you can also choose the more common technique and switch to full-band compressor mode. Use the Fabrik C as an insert on your channels - it's probably one of the best and most optimized tools you can use for that job.<BR><BR><B>Features:</B><BR>
<UL>
<LI>Novel UI design - Inbuilt MINT (Meta Intuitive Navigation Technology)<BR></LI>
<LI>Three sections with TC technology: EQ, de-esser and compressor<BR></LI>
<LI>Intuitive and easy control over dedicated parameters - Instant gratification<BR></LI>
<LI>4-band parametric EQ<BR></LI>
<LI>Scalable de-esser<BR></LI>
<LI>3-band/full band compressor<BR></LI>
<LI>Control many parameters with few knobs<BR></LI>
<LI>Based on proven and award winning TC Technology<BR></LI>
<LI>Windows XP and Mac OS X support<BR></LI>
<LI>VST, AU and RTAS (via the VST to RTAS adapter from FXpansion) support<BR></LI>
<LI>24-bit/96kHz support</LI></UL>

TC Electronic Fabrik C
PowerCore Plug-in with EQ, De-esser, and Compressor

TC's Fabrik R Plug-In for PowerCore is a collection of four stellar reverbs that will add depth and dimension to your tracks. This plug-in provides live, hall, club, and plate reverbs that are easy to set up and tweak.<BR><BR><B>Fabrik R Plug-In for PowerCore at a Glance:</B><BR>
<UL>
<LI>Four reverbs in one plug-in<BR></LI>
<LI>Achieve massive vocal sound with "Hall" reverb<BR></LI>
<LI>Very easy to adjust settings</LI></UL><BR><B>Four reverbs in one plug-in</B><BR>Fabrik R combines four new TC algorithms in one single plug-in. Thanks to the the Meta Intuitive Navigation Technology (MINT) it is a breeze to find the sound you're hearing inside your head. If you want to apply a "live" vibe to your vocals and instruments, use the Live Reverb. <BR><BR><B>Achieve massive vocal sound with "Hall" reverb</B><BR>For vocals that need an even "larger" quality, choose the Hall Reverb. For that sound of the past as well as for drums and percussion, apply the Plate Reverb. If you're working with guitars try the Club Reverb, which also works great with vocals. <BR><BR><B>Very easy to adjust settings</B><BR>Within each reverb you'll find it very easy to adjust any setting to your own taste. You won't waste time with nitty-gritty preset adjustments - all you really have to worry about, is using your ears.<BR><BR><B>Features:</B><BR>
<UL>
<LI>Novel UI design - Inbuilt MINT (Meta Intuitive Navigation Technology)<BR></LI>
<LI>Four new shining TC reverbs: FabrikLive, FabrikHall, FabrikPlate, FabrikClub<BR></LI>
<LI>Intuitive and easy control over dedicated parameters - Instant gratification<BR></LI>
<LI>Exceptionally good for vocal, drums and percussion, and instrument type source material<BR></LI>
<LI>Perfectly emulates that illustrious "live" ambience.<BR></LI>
<LI>Control many parameters with few knobs<BR></LI>
<LI>Based on proven and award winning TC Technology<BR></LI>
<LI>Windows XP and Mac OS X support for VST, Audio Units or RTAS (via the VST to RTAS adapter from FXpansion)</LI></UL>

TC Electronic Fabrik R
PowerCore Plug-in with Four Reverb Types

<P>The Finalizer 96K's all new set of advanced features and enhancements, including 96kHz internal and external processing truly puts the world of professional mastering within reach of every studio - large or small. 
<P>Inserted between the stereo output of your mixer or workstation and your master recording media, the Finalizer 96K dramatically rounds out your material, creating that "radio ready" sound - previously unattainable outside a professional mastering house.</P>
<P><B>What does the FInalzer 96K do?<BR></B>When you use the Finalizer 96K you can easily enhance the Dynamics of your mix while you mix. Inserted between the Stereo output of your mixer or DAW and your DAT or CDR, it enhances the dynamics and ensures optimal Analog to Digital conversion.<BR><BR></P>
<P>
<LI><B>Convert:</B> 24bit/96kHz resolution A/D and D/A converters, Format conversion (AES/EBU, S/PDIF and Tos-link) ADAT interface (track bounce) 
<LI><B>Sample Rate Conversion:</B> Enter and exit at any Sample Rate e.g. 32, 44.1, 48, 88.2 and 96kHz and make even asynchronous conversion possible 
<LI><B>Shape:</B> Five band 24bit Stereo Digital Equalizer 
<LI><B>Enhance:</B> Choose between Dynamic EQ, Stereo Adjust, Digital Radiance Generator™ and Spectral Stereo Image 
<LI><B>Normalize:</B> Real-time Gain Maximizer 
<LI><B>Expand:</B> Variable Slope multiband Expander 
<LI><B>Squeeze:</B> Multiband Compressor 
<LI><B>Trim:</B> Variable Ceiling multiband Limiter 
<LI><B>Fade:</B> Manual or Auto Fade Tool 
<LI><B>Dither:</B> Maintain the highest resolution at the digital AES/EBU and S/PDIF outputs, Tos-link and ADAT 
<LI><B>Balance:</B> L/R balance in 0.1dB steps <BR><BR>In short, all the tools you need are provided in the Finalizer 96K and makes it essential in your studio.</LI>

TC Electronic Finalizer 96K
Studio Mastering Processor; EQ, Multiband Comp/Lim/Exp

TC Electronic FireworX
Radical Studio Multi Effects Processor, w/ wordclock

TC Electronic ICON Cable - 24'
24' Cable to connect CPU to ICON remote

TC Electronic M-One XL
Studio/PA Dual Reverb Multi Effects Processor

<P><B>Magic</B> <BR>The M2000 provides you with a broad palette of high quality effects enabling you to create magical effects. The true dual engine configuration allows you to run two full-blown effects simultaneously, i.e. on two individual effects sends. The effects have been developed for optimal sonic quality with no compromises made. This has only been possible because our engineers succeeded in combining the latest technology with TC's powerful DARC?? chip. 
<P><B>Ultimate User-Interface</B> <BR>The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits your need in any situation. You simply enter your preferences, such as gentle reverb for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready to compare and use. 
<P><B>Uncompromising Effects <BR></B>The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus, Dynamics etc. Among the included reverbs you??l find the unique Co-efficient Optimised Room Emulator or C.O.R.E. Reverb?? based upon TC?? famous reverberation Technology. 
<P>Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into flanging at high levels giving the signal a totally new dynamic dimension. 
<P><B>The Sensation <BR></B>The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the professional format AES/EBU. However, specifications never tell the whole story. What really matters is how your final mix sounds. This is where TC?? long experience and know-how in high-end studio signal processing becomes important. 
<P><B>More Features</B> <BR>
<LI>250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more. 
<LI>True stereo Twin Engine processing with six different routings available. 
<LI>Dynamic Morphing?? and Patch Glide with adjustable glide times. 
<LI>20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth 
<LI>AES/EBU (24bit) and SPDIF (20bit) digital I/O. + 16bit dithering tool for DAT output. 
<LI>Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display. 
<LI>Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack. 
<LI>Both 128 user and 128 Combi-user presets + 4 snapshot memories. 
<LI>Universal auto-switching power supply (100-240V.) 
<P></P></LI>

TC Electronic M2000
Dual Engine Reverb & Multieffects Processor

TC Electronic M3000
Dual engine VSS3 Reverb and Multieffects processor

Results 1-20 of 88

1




API Audio Neve Barefoot Sound Shadow Hills Industries Retro Instruments Waves Audio Coles Microphones Endless Analog Clasp		Read what people are saying about Vintage King Audio Sales & Service from around the world. Read them here!		How about recycling your used gear for something different or just a change? When speaking to a sales representative, make sure to indicate that you are interested in trading your gear for a new purchase or please send an email to info@vintageking.com.

SALES		CUSTOMER SERVICE
888.653.1184 ext 3 +1.248.591.9276 ext 3 Sales Hours: M-F 10 to 8 (ET) Sat 12 to 4 (ET) Sun Closed More Information		888.653.1184 ext 2 +1.248.591.9276 ext 2 Customer Service Hours M-F 10 to 6 (ET) Sat Closed Sun Closed More Information

WHY SHOP KING?

Privacy and Security

Satisfaction Guaranteed

Warranty Information

Shipping and Delivery

Lifetime Customer Support

RESOURCES

Frequently Asked Questions

Terms and Conditions

Infrasonic Sound

Article Archives

Tax Exempt Forms

NEWS ROOM

ENTER EMAIL FOR
SPECIAL OFFERS

OUR NETWORKS

CATEGORIES

QUICK LINKS

Producers Corner

Trade Your Gear

Pensado's Place

Facebook Giveaways

OUR NETWORKS