Subwoofers | VintageKing.com

API Audio
Neve
Barefoot Sound
Shadow Hills Industries
Retro Instruments
Waves Audio
Coles Microphones
Endless Analog Clasp

Read what people are saying about Vintage King Audio Sales & Service from around the world. Read them here!

How about recycling your used gear for something different or just a change? When speaking to a sales representative, make sure to indicate that you are interested in trading your gear for a new purchase or please send an email to info@vintageking.com.

Results 1-10 of 39

Sort by Name

Sort by Price

Subwoofers

Adam Audio
ATC Loudspeakers
Barefoot Sound

Dynaudio
Focal
Genelec

Klein + Hummel
M-Audio
PMC Loudspeakers

ProAc
Quested
Yamaha

The ATC SCM0.1/15ASL Sub uses the incredible ATC invention, the SL driver. 375mm (15 inches) in diameter, it is the largest of the SL driver options and offers the lowest 3rd harmonic distortion of any large woofer we know, typically reducing it by 35dB. A massive built-in 1000W ATC high speed amplifier delivers over 118dB spl at 28Hz, an amazing feat. This sub is floor loaded to couple with almost any room properly (far better than any front loaded type sub). It also offers a nice user interface that addresses Billy Woodman’s philosophy of “no bass management”. The ATC sub has a dual XLR (L/R) input, an amp gain control, a LP filter with user selectable frequencies of 2K, 180Hz, 120, 90, 70, 50Hz. There is also a “contour” control that enables a peak type filter (boost) into the amplifier at around 100Hz if you want to compensate for AC3 or source deficiencies. ATC recommends no “bass management” or, no roll off for the main speakers when used with a sub. This bass management filtering artificially colors the main speaker sound and introduces filter/phase problems. ATC’s thought is that bass management was largely created to protect woofers in tiny satellites, not to improve overall response or transition between sub and mains. Run the main speakers full range and the sub at the widest possible bandwidth, then lower the LP filter freq to the sub from there. This generates a nice result and creates a smooth transition between mains and subs. The ATC sub package is flat to 28Hz and is very clean. True low distortion woofer output below 100Hz is a thing of beauty and we’ve heard it ONLY in the ATC. Do not expect to be “knocked down” with huge quantities of bass. Much of what we think is massive bass is really just loads of distortion at 200Hz to 300Hz! Sometimes this distortion can approach 40 to 50% of the total sub output! So word to the wise, do not buy this ATC sub for showing off to clients. It is a precision tool and engineers window into the “below 100 Hz” world of a mix; a near perfect mate to ATC mains. If you are making judgments on bass content we see no other way you can to do it properly than with the ATC sub. A single ATC SCM 0.1/15ASL will deliver output SPL of 118dB (1W/1M). IF you need more output you must add units. A single 1-15 sub is 118dB SPL, 2 is 121dB SPL, 4 is 124dB SPL and 8 is insane! ATC also makes a SCM0.1/12SL sub which sounds great but is designed for lower output and smaller rooms. It is fine for small production rooms but we do not recommend this unit for the typically larger studio control rooms. Call if you have any questions about using an ATC subwoofer with your system.

ATC Loudspeakers SUB 1/15 Pro - Single
The Ultimate Low Distortion Subwoofer by ATC

...
Learn more

Adam Audio ARTist Sub 7 - Black
210W active subwoofer - black

...
Learn more

Adam Audio ARTist Sub 7 - Black (Demo Deal)
210W active subwoofer - black

...
Learn more

Adam Audio Sub10 MK2 (single)
2-way active bass reflex speaker sub-woofer.

...
Learn more

Adam Audio Sub12 (single)
2-way active bass reflex speaker

...
Learn more

Adam Audio Sub20 (single)
400 watt subwoofer with 2x 10" speakers

...
Learn more

Adam Audio Sub2100
Active Subwoofer 1000 W/ 1x21"

...
Learn more

The Adam Audio Sub 24 is designed to reproduce LFE or other low frequency signals down to 19Hz in medium sized or larger control rooms. It is equipped with two long throw 12" drivers that are mounted at the opposite sides of the cabinet. The opposite and symmetrical alignment of forces applied to the cabinet provides much quieter performance than conventional arrays. Distortion is drastically reduced and the clarity of the signal is improved, especially at higher gain levels. There are two down-firing bass reflex tubes that successfully avoid ventilation noise due to their size and construction. Each woofer has its own amplifier, each capable of delivering 200 Watts continuous/300 Watts peak power to their corresponding drivers. The amplifier's Pulse Width Modulation (PWM) technology provides extremely high efficiency and cool operation in even the most critical levels of performance. Controls include a phase ± 180° switch, level control from -60 dB to +6 dB and a switchable 85 Hz high pass filter for the satellite output

Adam Audio Sub24 (single)
2 x 200-watt Active Subwoofer with Two 12" Woofers and Balanced XLR Inputs

...
Learn more

Adam Audio Sub7 Pro (single)
Active bass reflex speaker

...
Learn more

The Barefoot Sound MicroSUB uses the renowned Barefoot dual opposing driver format to achieve uncompromising, extremely linear deep bass extension. Reaching down to 22 Hz, the sealed cabinet design rolls off at 1/4 the rate of ported subs, revealing deeper bass information with far better transient response. Furthermore, while ported subs lose damping and stability at subsonic frequencies, the MicroSUB's damping actually increases. This innovative 2-way mid-bass/sub system, having precise extension up to 2 kHz, offers a great deal of flexibility. As a dedicated LFE monitor, the MicroSUB can readily reveal unwanted high frequency content in channel 6. In Satellite/Subwoofer arrangements, a pair of MicroSUBs can seamlessly transform even tiny monitors a into a powerful full-range system. Compact cabinets and near-zero vibration allow great placement flexibility as well. Place them on the floor, mount them on stands, place them on the meter bridge close to the monitors, whatever works for your application! The cabinet can be oriented either vertically or horizontally using the included pedestals (9" L x 1 3/8" W x 2 1/4" H). Topping off the uncompromising nature of the MicroSUB, a discreet 1 dB stepped attenuator level adjustment is incorporated.

Specifications
<ul>
<li>Description: 2-way active sealed-box subwoofer with extended bandwidth</li><li>
Subwoofer Input Controls: Stepped attenuator level adjust (+6 dB to -16 dB), mid/sub amplifier mutes, +10 dB gain</li><li>
Crossover Controls: 120/80/60 Hz frequency select, crossover IN/OUT</li><li>
Input Impedance: 50 kilo-ohm</li><li>
Bass Response: -3 dB @ 22 Hz, Q = 0.707, Slope = 12 dB/octave</li><li>
Pass Band Response: 26 Hz - 1.6 kHz (+/- 1.5 dB), -3 dB upper cutoff at 2 kHz</li><li>
Cabinet: 32 liters total internal volume, Sealed sub enclosure, sealed midbass enclosure, Machined aluminum front baffle plate</li><li>
Midbass Crossover Frequency: 95 Hz</li><li>
Midbass: 5" poly cone, Sealed rear waveguide enclosure</li><li>
Power (Midbass): 250 W</li><li>
Dual Subwoofers: 10" aluminum cones, 1" peak-to-peak linear excursion</li><li>
Power (Dual Subwoofers): 500 W</li><li>
AC Power Input: Nominal 115 VAC or 230 VAC selectable</li><li>
Power Consumption Idle: 30W</li>
<li>
Power Consumption Maximum: 675W</li>
<li>
Speaker Weight: 65 lbs each (30 kg)</li><li>
Shipping Weight: 73 lbs each (33 kg)</li><li>
Dimensions: (HxWxD) 20.5 x 9.5 x 15.25 inches (521 x 241 x 387 mm)
</li></ul>

Barefoot Sound MicroSUB
2-way active subwoofer

...
Learn more

Results 1-10 of 39

Sort by Name

Sort by Price

SALES		CUSTOMER SERVICE
888.653.1184 ext 3 +1.248.591.9276 ext 3 Sales Hours: M-F 10 to 8 (ET) Sat 12 to 4 (ET) Sun Closed More Information		888.653.1184 ext 2 +1.248.591.9276 ext 2 Customer Service Hours M-F 10 to 6 (ET) Sat Closed Sun Closed More Information