Preamp Module Racks | VintageKing.com

API Audio
Neve
Barefoot Sound
Shadow Hills Industries
Retro Instruments
Waves Audio
Coles Microphones
Endless Analog Clasp

Read what people are saying about Vintage King Audio Sales & Service from around the world. Read them here!

How about recycling your used gear for something different or just a change? When speaking to a sales representative, make sure to indicate that you are interested in trading your gear for a new purchase or please send an email to info@vintageking.com.

Results 1-20 of 34

Preamp Module Racks

BAE 2CR Dual-Channel Powered Rack - Black
Tow-slot rack with DI & PSU +48v phantom power - holds two 10 Series modules (not included)

...
Learn more

BAE 2CR Dual-Channel Powered Rack - Blue
Tow-slot rack with DI & PSU +48v phantom power - holds two 10 Series modules (not included)

...
Learn more

BAE 8CM Eight-Channel Summing Mixer/1073-Style Rack
Eight-channel mixer to house 10-Series mic/line preamp modules such as the famous 1073, 1084, 1023 and 1004 - modules not included

...
Learn more

The BAE (formerly Brent Averill Enterprises) 8 Module Powered Rack can be used with any Neve 1073-style modules including:
<ul>
<li>Brent Averill 1023 </li>
<li>Brent Averill 1073 </li>
<li>Brent Averill 1084 </li>
<li>Vintage Neve 1066 </li>
<li>Vintage and New Neve 1073 </li>
<li>Vintage and New Neve 1084 </li>
</ul>
Each module has its own separate output level control and lighted 48v phantom power switch.  The back panel has XLR connectors for mic input, line input and output. The oversize external power supply puts out two times the current necessary to power the rack.  It has an extra DC outlet which will operate any of our 1272 preamps or Class A Mixers. The power supply may be set for 220/240 volt operation for Europe or Australia at no extra charge.  As well we can set it for 100 volt operation for Japan at no extra charge. *NEVE IS EITHER A TRADEMARK OR REGISTERED TRADEMARK OF AMS-NEVE LTD, AND BAE IS NOT AFFILIATED WITH SUCH ENTITY

BAE 8CR Eight-Channel 1073-Style Rack - with PSU
Holds eight vintage or new Neve 1073 style modules (not included)

...
Learn more

Boutique Audio 3U Neve 1073 Style 2 Channel Rack - Unloaded
3u Rack that holds 2 Neve 1073-Style Modules

...
Learn more

Boutique Audio 3U Neve 1081 Style 2 Channel Rack - Unloaded
3u Rack that holds 2 Neve 1081-Style Modules

...
Learn more

The mic preamps utilized in the Neve 1081R Remote Rack represent the very essence of the Neve sound. These pres – the 1081 and the Air Montserrat – are chosen time and time again by recording engineers and producers all over the world. They have proven themselves over decades, tracking some of the most famous recordings of all time, and are found in a majority of the world’s finest studios. The 1081R is the ideal solution for engineers seeking multiple channels of Neve sound quality without investing in a new console. This system consists of a microprocessor-controlled 12-slot rack and a choice of two superb mic preamps, the Neve 1081 and Air Montserrat (from the vintage Air Montserrat console). By selecting their desired combination of mic preamps, engineers have the flexibility to record classical, pop, rock, or any other musical format, and control it all from a Neve Console or standalone PC. In terms of application, the Air Montserrat Pre is the optimum choice for ambient recording, while the 1081 offers the perfect response for close miking of vocals, acoustic instruments, and percussion. The rack can be positioned remotely and controlled via an Encore system on a Neve console or a standalone PC, making it the perfect choice for studio or live recording applications. (Connections come courtesy of a 9-pin serial control cable via RS232 to RS485 converter.) Operational settings such as gain, phase and 20dB pad can be controlled either from the rack or via the interface screen, and stored for later recall. The 1081R allows these legendary mic preamps to be used as remote inputs for the 88RS analogue console, or provides the perfect companion to our digital consoles. Highlights <ul><li>12-space remote-controlled rack featuring a selection of classic 1081 or Air Montserrat</li><li>Modern, convenient way to secure legendary Neve Sound</li><li>Controllable from Neve Console (Encore PC) or standalone PC</li><li>Serial connection to computer</li><li>Recall of all operational settings via software</li><li>Unique hand-wired Neve-designed input transformers </li></ul>

Neve 1081R 12 Slot Rack, PSU and Software - Unloaded
Remote Rack houses up to 12 Air Montserrat or 1081 mic preamps with remote adjust/recall, adding multichannel Neve quality to your console.

...
Learn more

Neve AMS 3U 1073/1084 2 Channel Rack - Unloaded
Authentic Neve rack holds 2x 1073/1084 style modules (sold separately)

...
Learn more

Neve AMS 3U 1081 2 way rack - Unloaded
Unloaded Authentic Neve rack

...
Learn more

Neve AMS 5U 1073/1084 8-Way Rack- Unloaded
Unloaded Authentic Neve rack

...
Learn more

Neve AMS 5U 1073/1084 8-Way Rack- Unloaded (Demo Deal)
Unloaded Authentic Neve rack

...
Learn more

Neve AMS 7U 1081 8 Way Rack - Unloaded
Unloaded Authentic Neve rack

...
Learn more

2u Vintage King Audio rack that holds 1 Neve 1073 Style Module. 
These racks are beautifully constructed and utilize correct low noise grounding scheme. 
Vintage King 2U Neve Single Channel Rack Information 
<ul>
<li>Switchcraft™ E-Series gold XLR's.

</li><li>¼” front panel line input (this is NOT an instrument input unless requested/optional).

</li><li>Low noise VK Custom power supply utilizing toroidal transformer capable of 600mA+ at 24V DC and 100mA at 48V DC. The current rating is over spec for the module.

</li><li>48V ramp circuit to eliminate “pop” when engaging 48V. Ramp time is approximately 30 seconds</li><li>High quality NKK™ lighted switch for 48V.

</li><li>Output “fader” wired to insert on module.

</li><li>Proper grounding techniques, per Neve™ documentation, are utilized for low noise.

</li><li>Chassis: 0.050” steel with aluminum front/rear panels and 6-32 steel press nuts. Chassis is an excellent blend of strength and weight.

</li><li>IEC power cable included.

</li><li>1 Year Warranty</li></ul>
Options (Must be ordered separately):<ul>
<li>Cinemag™ CM-DBX D.I. transformers available upon request.</li></ul>

Vintage King 2U Neve 1073 Style 1 Channel Rack - Unloaded Pre-tested and ready to ship!
Unloaded single channel rack. Fits Neve 1066, 1073, 1076, 1079, 1084, 2264, 32264 modules.

...
Learn more

2u Vintage King Audio rack that holds 1 Neve 1081 or 1064 Module. 
These racks are beautifully constructed and utilize a proper low noise grounding scheme. Lots of bang for the buck here! 
Vintage King 2U Single Channel Neve 1081 Rack Information 
<ul>
<li>Switchcraft™ E-Series gold XLR's.

</li><li>¼” front panel line input (this is NOT an instrument input unless requested).

</li><li>Low noise VK Custom power supply utilizing toroidal transformer capable of 600mA+ at 24V DC and 100mA at 48V DC. The current rating is over spec for the module.

</li><li>48V ramp circuit to eliminate “pop” when engaging 48V. Ramp time is approximately 30 seconds</li><li>High quality NKK™ lighted switch for 48V.

</li><li>Output “fader” wired to insert on module.

</li><li>Proper grounding techniques, per Neve™ documentation, are utilized for low noise.

</li><li>Chassis: 0.050” steel with aluminum front/rear panels and 6-32 steel press nuts. Chassis is an excellent blend of strength and weight.

</li><li>IEC power cable included.

</li><li>1 Year Warranty
</li></ul>
Options (Must be ordered separately):<ul>
<li>Cinemag™ CM-DBX D.I. transformers available upon request.</li></ul>

Vintage King 2U Neve 1081 style 1 Channel Rack - Unloaded Pre-tested and ready to ship!
Unloaded Single channel rack. Also fits Neve 1064 Modules.

...
Learn more

Vintage King 2U Neve 32264 style 1 Channel Rack - Unloaded
Unloaded single channel VK rack, fits one Neve 32264 Module.

...
Learn more

2u Vintage King Audio rack that holds 1 Neve broadcast module from the 24V series. These racks are beautifully constructed and utilize a proper low noise grounding scheme. Lots of bang for the buck here!  Rack can accept a variety of Neve broadcast modules from the 24v series, such as the 33114, 33115, 33122, 33129.  It can also accept the 31114, 31115, and 33314 compressors (no metering).  Comes with 48v and internal PSU.  Serviced, with a 1 year warranty. Vintage King 2U Neve Single Channel Rack Information 
<ul>
<li>Switchcraft™ E-Series gold XLR's.

</li><li>¼” front panel line input (this is NOT an instrument input unless requested/optional).

</li><li>Low noise VK Custom power supply utilizing toroidal transformer capable of 600mA+ at 24V DC and 100mA at 48V DC. The current rating is over spec for the module.

</li><li>48V ramp circuit to eliminate “pop” when engaging 48V. Ramp time is approximately 30 seconds.</li><li>High quality NKK™ lighted switch for 48V.

</li><li>Output “fader” wired to insert on module.

</li><li>Proper grounding techniques, per Neve™ documentation, are utilized for low noise.

</li><li>Chassis: 0.050” steel with aluminum front/rear panels and 6-32 steel press nuts. Chassis is an excellent blend of strength and weight.

</li><li>IEC power cable included.

</li><li>1 Year Warranty
</li></ul>Options (Contact a sales associate): 
<ul><li>Cinemag™ CM-DBX D.I. transformers available upon request.</li></ul>

Vintage King 2U Neve 33114/33115 style 1 Channel Rack
Unloaded Custom VKA Neve Single Channel Rack

...
Learn more

What you’ve heard is true, these are an amazing preamp for recording electric guitars. They definitely have “color” in the midband that works magic on guitars and some vocals. Toward the top end of the gain range the top end rolls off slightly - further coloring and warming the audio. Not the most “open” preamp, but one of the most interesting! Features: 
<ul>
<li>Switchcraft™ E-Series gold XLR's. 
</li><li>¼” front panel input (this is NOT an instrument input unless requested). 
</li><li>Independent switching for 48V, Phase, 20dB pad. 
</li><li>Low noise VK Custom power supply utilizing toroidal transformer capable of 600mA+ at 24V DC and 100mA at 48V DC. The current rating is over spec for the modules.  
</li><li>Combination of 20dB pad + gain pot allows gain range of 14dB to 65dB (51dB total range) 
</li><li>Proper grounding techniques are utilized for low noise. 
</li><li>Chassis: 0.050” steel with aluminum front/rear panels and 6-32 steel press nuts. Chassis is an excellent blend of strength and weight. 
</li><li>IEC power cable included. 
</li><li>1 Year Warranty </li></ul>
Options (Contact a sales associate) <ul>
<li>48V ramp circuit to eliminate “pop” when engaging 48V. Ramp time is approximately 30 seconds</li></ul>

Vintage King 2U Telefunken V672 Dual-Channel Rack - Unloaded
Unloaded VKA rack holds a pair of Telefunken V672 modules.

...
Learn more

Vintage King 2U Telefunken V676 Dual-Channel Rack - Unloaded
Unloaded custom VKA rack holds two Telefunken V676 modules.

...
Learn more

Vintage King 2u Telefunken V72 Dual-Channel Rack - Unloaded
Unloaded 2 Channel Vintage King V72 Rack in a 2u chassis.

...
Learn more

These racks are beautifully constructed and utilize a proper low noise grounding scheme. Lots of bang for the buck here!   Vintage King 3U Dual Channel Rack Information 
<ul>
<li>Switchcraft™ E-Series gold XLR's. 
</li><li>¼” front panel line input (this is NOT an instrument input unless requested/optional). 
</li><li>Low noise VK Custom power supply utilizing toroidal transformer capable of 600mA+ at 24V DC and 100mA at 48V DC. The current rating is over spec for the module. 
</li><li>High quality NKK™ lighted switch for 48V. 
</li><li>Output “fader” wired to insert on module. 
</li><li>Proper grounding techniques are utilized for low noise. 
</li><li>Chassis: 0.050” steel with aluminum front/rear panels and 6-32 steel press nuts. Chassis is an excellent blend of strength and weight. 
</li><li>IEC power cable included. 
</li><li>1 Year Warranty</li>
</ul>
Options (Must be ordered separately):<ul>
<li>Cinemag™ CM-DBX D.I. transformers available upon request.
</li><li>48V ramp circuit to eliminate “pop” when engaging 48V. Ramp time is approximately 30 seconds</li></ul>

Vintage King 3U Audix style 2 Channel Rack - Unloaded
Unloaded 2 Channel VKA rack for Audix modules.

...
Learn more

Results 1-20 of 34

Sort by Name

Sort by Price

SALES		CUSTOMER SERVICE
888.653.1184 ext 3 +1.248.591.9276 ext 3 Sales Hours: M-F 10 to 8 (ET) Sat 12 to 4 (ET) Sun Closed More Information		888.653.1184 ext 2 +1.248.591.9276 ext 2 Customer Service Hours M-F 10 to 6 (ET) Sat Closed Sun Closed More Information